Products – Shreiner Company
1
Yes
None
1
1000000
/products/
Thumbnail
Filter

Categories:

Rubber
RD-73 (Firm) Red Microcell
RD-73 (Firm) Red Microcell Image
Shore 00 – 73          Shore A – 27 RD-73 is a firm microcell ejection rubber that is extremely versatile for use on multiple substrates, and multiple styles of diecutting presses.  RD-73 is a top choice for folding carton and printing shops alike.  This product is slightly softer than the traditional T-75, however it boasts a better recovery time.  The decreased firmness and faster recovery will allow diecutting presses to be run at faster speeds and with less pressure.  This means that many of the secondary issues that arise when diecutting pressure is increased can be mitigated, and in many cases eliminated by using this product.  The microcell structure of RD-73 ensures a product that is consistent throughout, and it will not allow the penetration of air and dust, greatly extending the longevity of the rubber.  This ejection rubber also allows for maximum adhesion to any die board.  As an added bonus, RD-73 is an ideal rubber for use in blanking.  RD-73 is functional up to 80% compression.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box.
1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 1
  • Microcell
  • Flat die ejection for various substrates on any type of press
  • Ideal for blanking
  • Fast recovery for fast running speeds
  • Excellent adhesion characteristics
PI-17 (Super Soft) Blue Open Cell
PI-17 (Super Soft) Blue Open Cell Image
Shore 00 – 17 PI-17 is versatile sponge used for specialty applications in both rotary and flat diecutting.
Cork (Super Firm)
Cork (Super Firm) Image
Shore 00 – 90 Shore A - 50 Cork is made up of both cork and neoprene rubber.  Once a staple for diecutting ejection, it is now primarily used for areas one wishes to crush.  It is important to note that due to the extreme firmness of cork, it’s use should be limited so as to not add unwanted pressure to the diecutting process.  Cork is only functional up to 40% compression.  This product is available with PSA, and in strips or sheets. Click the height below to see the available cut sizes and quantity per box.
1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4
 
  • Flat die ejection for areas you wish to crush
R-86 (Super Firm) Black Urethane
R-86 (Super Firm) Black Urethane Image
Shore 00 – 86          Shore A - 45 R-86 is an extra firm, dense, slot ejector for both rotary and flat diecutting.  This product is ideal for tight slot areas.  This product can also be used in blocks for rotary trim breaker.  R-86 is effective up to 70% compression.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box.
1/16 3/32 1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4
 
  • Urethane
  • Slot ejection for flat and rotary dies
  • Excellent option for trim breaker
Dura-Bull (Super Firm) Cream Poly
Dura-Bull (Super Firm) Cream Poly Image
Shore 00 – 82          Shore A - 40 Dura-Bull is a popular choice for the ejection of slots in both flat and rotary die applications.  The unique make-up of this product does not allow for bulging when compressed, making it ideal for slot ejection.  It is also an excellent option for trim breaker and scrap ejection on rotary dies.  Dura-Bull is functional up to 70% compression.  This product is available in straight or scalloped strips. Click the height below to see the available cut sizes and quantity per box.
3/8 7/16 1/2 9/16 5/8 11/16
 
  • Slot ejection for flat and rotary dies
  • Does not bulge under compression
  • Excellent option for trim breaker
  • Straight or scalloped profiles
K-60 (Medium) Dark Tan Open Cell
K-60 (Medium) Dark Tan Open Cell Image
Shore 00 – 60          Shore A - 15 K-60 is a medium firmness, economical ejection rubber, similar to B-65.  This product works well with thicker substrates on presses where there is little to no pressure adjustments.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box.
1/4 3/8
 
  • Open Cell
  • Flat die ejection for thicker card stocks on cylinder and windmill style presses
6220 (Medium) Tan Open Cell
6220 (Medium) Tan Open Cell Image
Shore 00 – 67          Shore A - 20 6220 is one of the four premium ejection rubbers offered in the Diansuply range of products (6110, 6118, 6220, 6320).  Even though premium ejection is an open cell rubber, a higher rubber content is added to cut down on the large air pockets usually associated with open cell.  The smaller air pockets allow for a more balanced ejection, and less air and dust being drawn into the body when under impression, which in turn adds longevity to the rubber.  6220 is primarily used for thicker substrates on presses with little or no pressure adjustments.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box.
1/4 3/8 1/2
 
  • Premium Open Cell
  • Flat die ejection for card stocks on cylinder and windmill style presses
6320 (Soft) Light Tan Open Cell
6320 (Soft) Light Tan Open Cell Image
Shore 00 – 62          Shore A - 15 6320 is one of the four premium ejection rubbers offered in the Diansuply range of products (6110, 6118, 6220, 6320).  Even though premium ejection is an open cell rubber, a higher rubber content is added to cut down on the large air pockets usually associated with open cell.  The smaller air pockets allow for a more balanced ejection, and less air and dust being drawn into the body when under impression, which in turn adds longevity to the rubber.  6320 is primarily used for thicker or delicate substrates where denting or crushing could be an issue.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box.
1/4 3/8 1/2
 
  • Premium Open Cell
  • Flat die ejection for thicker stocks where crushing is an issue
61-X (Extra Firm) Light Red Open Cell
61-X (Extra Firm) Light Red Open Cell Image
Shore 00 – 78          Shore A - 30 61-X is an alternative extra firm ejector offering premium rubber qualities and economic pricing.  This rubber should be used when you need a little extra kick to eject a substrate.  61-X is used primarily for folding carton on auto platen presses and for thinner substrates. This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box.
7mm 3/8
 
  • Open Cell
  • Flat die ejection for folding carton on high speed presses
6110 (Extra Firm) Light Red Open Cell
6110 (Extra Firm) Light Red Open Cell Image
Shore 00 – 78          Shore A - 30 6110 is one of the four premium ejection rubbers offered in the Diansuply range of products (6110, 6118, 6220, 6320).  Even though premium ejection is an open cell rubber, a higher rubber content is added to cut down on the large air pockets usually associated with open cell.  The smaller air pockets allow for a more balanced ejection, and less air and dust being drawn into the body when under impression, which in turn adds longevity to the rubber.  6110 is primarily used for folding carton on auto platen presses.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box.
1/8 3/16 1/4 5/16 3/8
 
  • Premium Open Cell
  • Flat die ejection for folding carton on high speed presses
6118 (Firm) Red Open Cell
6118 (Firm) Red Open Cell Image
Shore 00 – 72          Shore A - 25 6118 is one of the four premium ejection rubbers offered in the Diansuply range of products (6110, 6118, 6220, 6320).  Even though premium ejection is an open cell rubber, a higher rubber content is added to cut down on the large air pockets usually associated with open cell.  The smaller air pockets allow for a more balanced ejection, and less air and dust being drawn into the body when under impression, which in turn adds longevity to the rubber.  6118 is primarily used for card stocks and other thicker materials.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box.
1/4 7mm 5/16 3/8 7/16 1/2 9/16 5/8
 
  • Premium Open Cell
  • Flat die ejection for card stocks on cylinder and windmill style presses
T-75 (Extra Firm) Dark Red Open Cell
T-75 (Extra Firm) Dark Red Open Cell Image
Shore 00 – 75          Shore A – 30 T-75 has been the “go to” rubber in the folding carton industry for decades.  Primarily used with auto platen style presses, T-75 is a cost effective, extra firm rubber with outstanding rebound allowing fast running speeds.  T-75 is also extremely effective in ejection for labels and other thin substrates.  T-75 is effective up to 60% compression.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box.
1/4 7mm 5/16 3/8
 
  • Open Cell
  • Flat die ejection for folding carton on high speed presses
F-70 (Firm) Light Red Open Cell
F-70 (Firm) Light Red Open Cell Image
Shore 00 – 70          Shore A - 22 F-70 is an open cell rubber primarily used as a secondary option to B-65 on cylinder and windmill style presses where a slightly firmer rubber is needed.  This rubber works well to eject substrates in an environment where press pressure adjustments are minimal.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box.
3/8 7/16 1/2
 
  • Open Cell
  • Flat die ejection for card stocks on cylinder and windmill style presses
B-65 (Medium) Black Open Cell
B-65 (Medium) Black Open Cell Image
Shore 00 – 65          Shore A - 20 B-65 is the most prevalent rubber used in print shops that do small diecutting jobs, and is the Shreiner number one pick for customers doing this type of work.  If you have ever run a cylinder or windmill press, chances are B-65 was the rubber on the die.  B-65 is very economic and has versatility across many different types of substrates, from card stock to corrugated.  This is the perfect ejection rubber for presses with little or no pressure adjustments.  B-65 is effective up to 60% compression.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box.
1/8 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4
 
  • Open Cell
  • Flat die ejection for various substrates on cylinder and windmill style presses
  • Economical
G-257 (Medium) Grey Closed Cell
G-257 (Medium) Grey Closed Cell Image
Shore 00 – 62          Shore A – 15 G-257 is the industry standard for corrugated and foam core diecutting. This rubber is soft enough not to dent delicate material, yet firm enough to eject at high speed.  Although grey is the most common color for this product, it is also available in red, blue, and black.  G-257 is functional up to 80% compression.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box.
1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1
 
  • Closed Cell
  • Rotary and Flat die ejection for corrugated and foam core substrates
  • Available in Grey, Black, Blue, and Red
GN-88 (Super Firm) Green Microcell
GN-88 (Super Firm) Green Microcell Image
Shore 00 – 88          Shore A – 45 GN-88 is the ideal rubber, and the industry standard, for the ejection of slots and other hard to eject areas.  A microcell product, GN-88 ensures total consistency, even ejection, and great adhesion to the die board.  The recovery of this product is fast.  The range of cut options for this product are wide ranging, including; ZAG Profile, Maxpoint, Side Wave, Straight, Scalloped, as well as, full sheet and pad sizes.  GN-88 is functional up to 70% compression.  All cuts and profiles are available with PSA.   Click the height below to see the available cut sizes and quantity per box.
1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8
 
  • Microcell
  • Ideal for slot ejection on both flat and rotary dies
  • Multiple special cut options available
  • Excellent adhesion characteristics
Stripping Foam (White Soft) (Black Firm)
Stripping Foam (White Soft) (Black Firm) Image
Used on stripping dies to hold the substrate in place. Available in a Soft White and Firm Black. Click the height below to see the available cut sizes and quantity per box.
1/4 3/8 1 1/2 1 5/8
 
Rubber
RD-73 (Firm) Red Microcell Image
RD-73 (Firm) Red Microcell
Shore 00 – 73          Shore A – 27 RD-73 is a firm microcell ejection rubber that is extremely versatile for use on multiple substrates, and multiple styles of diecutting presses.  RD-73 is a top choice for folding carton and printing shops alike.  This product is slightly softer than the traditional T-75, however it boasts a better recovery time.  The decreased firmness and faster recovery will allow diecutting presses to be run at faster speeds and with less pressure.  This means that many of the secondary issues that arise when diecutting pressure is increased can be mitigated, and in many cases eliminated by using this product.  The microcell structure of RD-73 ensures a product that is consistent throughout, and it will not allow the penetration of air and dust, greatly extending the longevity of the rubber.  This ejection rubber also allows for maximum adhesion to any die board.  As an added bonus, RD-73 is an ideal rubber for use in blanking.  RD-73 is functional up to 80% compression.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box. 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 1 Microcell Flat die ejection for various substrates on any type of press Ideal for blanking Fast recovery for fast running speeds Excellent adhesion characteristics
PI-17 (Super Soft) Blue Open Cell Image
PI-17 (Super Soft) Blue Open Cell
Shore 00 – 17 PI-17 is versatile sponge used for specialty applications in both rotary and flat diecutting.
Cork (Super Firm) Image
Cork (Super Firm)
Shore 00 – 90 Shore A - 50 Cork is made up of both cork and neoprene rubber.  Once a staple for diecutting ejection, it is now primarily used for areas one wishes to crush.  It is important to note that due to the extreme firmness of cork, it’s use should be limited so as to not add unwanted pressure to the diecutting process.  Cork is only functional up to 40% compression.  This product is available with PSA, and in strips or sheets. Click the height below to see the available cut sizes and quantity per box. 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4   Flat die ejection for areas you wish to crush
R-86 (Super Firm) Black Urethane Image
R-86 (Super Firm) Black Urethane
Shore 00 – 86          Shore A - 45 R-86 is an extra firm, dense, slot ejector for both rotary and flat diecutting.  This product is ideal for tight slot areas.  This product can also be used in blocks for rotary trim breaker.  R-86 is effective up to 70% compression.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box. 1/16 3/32 1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4   Urethane Slot ejection for flat and rotary dies Excellent option for trim breaker
Dura-Bull (Super Firm) Cream Poly Image
Dura-Bull (Super Firm) Cream Poly
Shore 00 – 82          Shore A - 40 Dura-Bull is a popular choice for the ejection of slots in both flat and rotary die applications.  The unique make-up of this product does not allow for bulging when compressed, making it ideal for slot ejection.  It is also an excellent option for trim breaker and scrap ejection on rotary dies.  Dura-Bull is functional up to 70% compression.  This product is available in straight or scalloped strips. Click the height below to see the available cut sizes and quantity per box. 3/8 7/16 1/2 9/16 5/8 11/16   Slot ejection for flat and rotary dies Does not bulge under compression Excellent option for trim breaker Straight or scalloped profiles
K-60 (Medium) Dark Tan Open Cell Image
K-60 (Medium) Dark Tan Open Cell
Shore 00 – 60          Shore A - 15 K-60 is a medium firmness, economical ejection rubber, similar to B-65.  This product works well with thicker substrates on presses where there is little to no pressure adjustments.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box. 1/4 3/8   Open Cell Flat die ejection for thicker card stocks on cylinder and windmill style presses
6220 (Medium) Tan Open Cell Image
6220 (Medium) Tan Open Cell
Shore 00 – 67          Shore A - 20 6220 is one of the four premium ejection rubbers offered in the Diansuply range of products (6110, 6118, 6220, 6320).  Even though premium ejection is an open cell rubber, a higher rubber content is added to cut down on the large air pockets usually associated with open cell.  The smaller air pockets allow for a more balanced ejection, and less air and dust being drawn into the body when under impression, which in turn adds longevity to the rubber.  6220 is primarily used for thicker substrates on presses with little or no pressure adjustments.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box. 1/4 3/8 1/2   Premium Open Cell Flat die ejection for card stocks on cylinder and windmill style presses
6320 (Soft) Light Tan Open Cell Image
6320 (Soft) Light Tan Open Cell
Shore 00 – 62          Shore A - 15 6320 is one of the four premium ejection rubbers offered in the Diansuply range of products (6110, 6118, 6220, 6320).  Even though premium ejection is an open cell rubber, a higher rubber content is added to cut down on the large air pockets usually associated with open cell.  The smaller air pockets allow for a more balanced ejection, and less air and dust being drawn into the body when under impression, which in turn adds longevity to the rubber.  6320 is primarily used for thicker or delicate substrates where denting or crushing could be an issue.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box. 1/4 3/8 1/2   Premium Open Cell Flat die ejection for thicker stocks where crushing is an issue
61-X (Extra Firm) Light Red Open Cell Image
61-X (Extra Firm) Light Red Open Cell
Shore 00 – 78          Shore A - 30 61-X is an alternative extra firm ejector offering premium rubber qualities and economic pricing.  This rubber should be used when you need a little extra kick to eject a substrate.  61-X is used primarily for folding carton on auto platen presses and for thinner substrates. This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes. Click the height below to see the available cut sizes and quantity per box. 7mm 3/8   Open Cell Flat die ejection for folding carton on high speed presses
6110 (Extra Firm) Light Red Open Cell Image
6110 (Extra Firm) Light Red Open Cell
Shore 00 – 78          Shore A - 30 6110 is one of the four premium ejection rubbers offered in the Diansuply range of products (6110, 6118, 6220, 6320).  Even though premium ejection is an open cell rubber, a higher rubber content is added to cut down on the large air pockets usually associated with open cell.  The smaller air pockets allow for a more balanced ejection, and less air and dust being drawn into the body when under impression, which in turn adds longevity to the rubber.  6110 is primarily used for folding carton on auto platen presses.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box. 1/8 3/16 1/4 5/16 3/8   Premium Open Cell Flat die ejection for folding carton on high speed presses
6118 (Firm) Red Open Cell Image
6118 (Firm) Red Open Cell
Shore 00 – 72          Shore A - 25 6118 is one of the four premium ejection rubbers offered in the Diansuply range of products (6110, 6118, 6220, 6320).  Even though premium ejection is an open cell rubber, a higher rubber content is added to cut down on the large air pockets usually associated with open cell.  The smaller air pockets allow for a more balanced ejection, and less air and dust being drawn into the body when under impression, which in turn adds longevity to the rubber.  6118 is primarily used for card stocks and other thicker materials.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box. 1/4 7mm 5/16 3/8 7/16 1/2 9/16 5/8   Premium Open Cell Flat die ejection for card stocks on cylinder and windmill style presses
T-75 (Extra Firm) Dark Red Open Cell Image
T-75 (Extra Firm) Dark Red Open Cell
Shore 00 – 75          Shore A – 30 T-75 has been the “go to” rubber in the folding carton industry for decades.  Primarily used with auto platen style presses, T-75 is a cost effective, extra firm rubber with outstanding rebound allowing fast running speeds.  T-75 is also extremely effective in ejection for labels and other thin substrates.  T-75 is effective up to 60% compression.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box. 1/4 7mm 5/16 3/8   Open Cell Flat die ejection for folding carton on high speed presses
F-70 (Firm) Light Red Open Cell Image
F-70 (Firm) Light Red Open Cell
Shore 00 – 70          Shore A - 22 F-70 is an open cell rubber primarily used as a secondary option to B-65 on cylinder and windmill style presses where a slightly firmer rubber is needed.  This rubber works well to eject substrates in an environment where press pressure adjustments are minimal.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box. 3/8 7/16 1/2   Open Cell Flat die ejection for card stocks on cylinder and windmill style presses
B-65 (Medium) Black Open Cell Image
B-65 (Medium) Black Open Cell
Shore 00 – 65          Shore A - 20 B-65 is the most prevalent rubber used in print shops that do small diecutting jobs, and is the Shreiner number one pick for customers doing this type of work.  If you have ever run a cylinder or windmill press, chances are B-65 was the rubber on the die.  B-65 is very economic and has versatility across many different types of substrates, from card stock to corrugated.  This is the perfect ejection rubber for presses with little or no pressure adjustments.  B-65 is effective up to 60% compression.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box. 1/8 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4   Open Cell Flat die ejection for various substrates on cylinder and windmill style presses Economical
G-257 (Medium) Grey Closed Cell Image
G-257 (Medium) Grey Closed Cell
Shore 00 – 62          Shore A – 15 G-257 is the industry standard for corrugated and foam core diecutting. This rubber is soft enough not to dent delicate material, yet firm enough to eject at high speed.  Although grey is the most common color for this product, it is also available in red, blue, and black.  G-257 is functional up to 80% compression.  This product is available with PSA, and Maxpoint or Side Wave profiles across the entire range of sizes.   Click the height below to see the available cut sizes and quantity per box. 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1   Closed Cell Rotary and Flat die ejection for corrugated and foam core substrates Available in Grey, Black, Blue, and Red
GN-88 (Super Firm) Green Microcell Image
GN-88 (Super Firm) Green Microcell
Shore 00 – 88          Shore A – 45 GN-88 is the ideal rubber, and the industry standard, for the ejection of slots and other hard to eject areas.  A microcell product, GN-88 ensures total consistency, even ejection, and great adhesion to the die board.  The recovery of this product is fast.  The range of cut options for this product are wide ranging, including; ZAG Profile, Maxpoint, Side Wave, Straight, Scalloped, as well as, full sheet and pad sizes.  GN-88 is functional up to 70% compression.  All cuts and profiles are available with PSA.   Click the height below to see the available cut sizes and quantity per box. 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8   Microcell Ideal for slot ejection on both flat and rotary dies Multiple special cut options available Excellent adhesion characteristics
Stripping Foam (White Soft) (Black Firm) Image
Stripping Foam (White Soft) (Black Firm)
Used on stripping dies to hold the substrate in place. Available in a Soft White and Firm Black. Click the height below to see the available cut sizes and quantity per box. 1/4 3/8 1 1/2 1 5/8